Resetting The System - Fujitsu PenCentra 200 User Manual

Reset Button
Suspend/Resume Button
When you have finished working with your PenCentra, or when you will not be
using it for an extended period, you should suspend operation to conserve battery
power. There are two ways to suspend the system:
Note: It is good practice to always save your active data before suspending the system.
Doing so ensures that no data is lost in the event of power interruption.
• Save your work, then press the suspend/resume button. The system operation
will immediately suspend. When you resume operation, the system will resume
at the point at which you suspended operation, or,
• Save your work, then click the Start icon on your desktop. Click on Suspend from
the Start menu. The system operation will immediately suspend. When you
resume operation, the system will resume at the point at which you suspended
operation.

Resetting the system

Note: • Pressing the reset button while there is active data on your screen will result in
that data being lost.
• It is not necessary to use excessive pressure when depressing the reset button.
Excessive pressure could result in damage to the system.
In the event your system freezes up and does not respond to pen taps or keystrokes,
it may become necessary to reset the system. To reset the system, lightly press the
reset button (see Figure 2-1) using the tip of your PenCentra pen. When the reset
button is pressed, the system reboots.
16 Using the PenCentra 200
PC Card Slots
Figure 2-1 Location of Suspend/Resume Button
2