Primary, Secondary, Tertiary, Fourth, Fifth, And Sixth Ide Master/Slave - Asus RS161-E4 PA2 User Manual

5.3.5 Primary, Secondary, Tertiary, Fourth, Fifth,
and Sixth IDE Master/Slave
The BIOS automatically detects the connected IDE devices. There is a separate
sub-menu for each IDE device. Select a device item, then press <Enter> to
display the IDE device information.
Main
Third IDE Master
Device : Hard Disk
Vendor : HDT722525DLA380
Size : 250.0GB
LBA Mode : Supported
Block Mode : 16 Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-6
S.M.A.R.T. : Supported
LBA/Large Mode
Block(Multi-sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device,
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and
S.M.A.R.T. monitoring). These values are not user-configurable. These items
show N/A if no IDE device is installed in the system.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if
the device supports this mode, and if the device was not previously formatted
with LBA mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the
data transfer from and to the device occurs multiple sectors at a time if the
device supports multi-sector transfer feature. When set to [Disabled], the data
transfer from and to the device occurs one sector at a time. Configuration
options: [Disabled] [Auto]
ASUS RS161-E4/PA2
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Select the type of
device connected to the
system.
Select Screen
→←
Select Item
↑↓
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
5-17