Table of Contents
Advertisement
5.2
Marvell
configuration utility
The Marvell
6121 RAID BIOS Configuration utility allows you to create
®
RAID 0 and RAID 1 set(s) from Serial ATA hard disk drives that are connected to
the Serial ATA connectors supported by the Southbridge.
To enter the Marvell
1.
Install all the Serial ATA hard disk drives at Red SATA Connector.
2.
Turn on the system.
3.
During POST, press <Ctrl> + <M> to enter the utility main menu.
ENTER/SPACE:Select, ESC:Back/Exit
[ Adapter]
Adapter 1
Arrays Information:
No array is defined!
Disks Information:
ID Port Disk Name
0
0
SATA: Hitachi HDS721010KLA330
4
1
SATA: Hitachi HDS721010KLA330
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
4.
Press <Enter> and select a desired adapter for RAID configuration.
ENTER/SPACE:Select, ESC:Back/Exit
[ Adapter]
Select Adapter
Adapter 1
Adapter 1
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
ASUS Hummingbird
®
6121 RAID BIOS
RAID BIOS Configuration utility:
®
[ Create]
[ Delete]
[ Create]
[ Delete]
Size
Speed
Status
1TB
SATA II
FREE
1TB
SATA II
FREE
5-5
Advertisement
Table of Contents
