Table of Contents
Advertisement
4.3.4
Storage Configuration
The items in this menu allow you to set or change the configurations for the SATA
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Main
Storage Configuration
Configure SATA as
SATA Run Mode Configuration
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Configure SATA as [IDE]
Sets the configuration for the Serial ATA connectors supported by the Intel
chipset. Configuration options: [IDE] [AHCI] [Disabled]
•
If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, keep the default setting [IDE].
•
If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows
the onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing the drive
to internally optimize the order of commands.
SATA Run Mode Configuration [Enhanced]
This item appears only when you set the previous item to [IDE].
Configuration options: [Compatible] [Enhanced]
ASUS Hummingbird
BIOS SETUP UTILITY
[IDE]
[Enhanced]
Options
IDE
AHCI
Disabled
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
NM10
®
4-13
Advertisement
Table of Contents
