Marvell ® 88Se6145 Raid Bios Configuration Utility (Dseb-Dg Model Only) - Asus DSEB-DG SAS User Manual

5.5 Marvell
configuration utility
The Marvell
®
RAID 0, RAID 1, RAID 10 ,and RAID 5 set(s) from Serial ATA hard disk drives that
are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Marvell
1. Install all the Serial ATA hard disk drives at Red SATA Connector.
2. Turn on the system.
3. During POST, press <Ctrl> + <M> to enter the utility main menu.
ENTER/SPACE:Select, ESC:Back/Exit
[ Adapter]
Adapter 1
Arrays Information:
No array is defined!
Disks Information:
ID Port Disk Name
0 0
4 1
8 2
12 3
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
4. Press <Enter> and select a desired adapter for RAID configuration.
ENTER/SPACE:Select, ESC:Back/Exit
[ Adapter]
Select Adapter
Adapter 1
Adapter 1
Adapter 2
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
5-40
®
88SE6145 RAID BIOS
88SE6145 RAID BIOS Configuration utility allows you to create
RAID BIOS Configuration utility:
®
[ Create] [ Delete]
SATA: Hitachi HDS721010KLA330
SATA: Hitachi HDS721010KLA330
SATA: Hitachi HDS721010KLA330
SATA: Hitachi HDS721010KLA330
[ Create] [ Delete]
(DSEB-DG model only)
Size Speed Status
1TB SATA II FREE
1TB SATA II FREE
1TB SATA II FREE
1TB SATA II FREE
Chapter 5: RAID configuration