Table of Contents
Advertisement
6.
Insert the Red Hat
OK, then press <Enter>.
Insert Driver Disk
Insert your driver disk into /dev/sda
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
When asked if you will load additional RAID controller drivers, select No, then
7.
press <Enter>.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes
8.
Follow the onscreen instructions to finish the OS installation.
When the installation is completed, DO NOT click Reboot.
9.
Press <Ctrl> + <Alt> + <F2> to switch to the command-line interface from
graphic user interface.
10. Type the following commands when using a USB floppy.
cat /proc/partitions
Write down the Major and Minor number before sd<x> for later use.
mknod /dev/sd<x> b [major number] [minor number]
chroot /mnt/sysimage
mount /dev/sda /media
sh /media/post.install
umount /media
exit
The sd<x> device name varies depending on the numbers of installed USB
devices.
ASUS Hummingbird
Enterprise RAID driver disk to the floppy disk drive, select
®
OK
Back
No
6-9
Advertisement
Table of Contents
