Asus Hummingbird User Manual page 94

Red Hat Enterprise Linux OS 5
®
To install the RAID controller driver when installing Red Hat
1. Boot the system from the Red Hat
2. At the boot:, type linux dd.
3. Press <Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have the driver disk, then
4.
press <Enter>.
Do you have a driver disk?
Yes
Select sda using the <Tab> key when asked to select the driver disk source.
5.
Press <Tab> to move the cursor to OK, then press <Enter>.
You have multiple devices which could
serve as sources for a driver disk.
Which would you like to use?
6-8
Driver disk
No
Driver Disk Source
sda
scd0
OK Cancel
OS installation CD.
®
Chapter 6: Driver installation
Enterprise OS:
®