4.6
Power menu
Main
Advanced
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
EuP Ready
APM Configuration
Hardware Monitor
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
4.6.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend.
Configuration options: [S1 (POS) only] [S3 only] [Auto]
4.6.2
ACPI 2.0 Support [Enabled]
Add additional tables as per ACPI 2.0 specifications.
Configuration options: [Disabled] [Enabled]
4.6.3
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
4.6.4
EuP Ready [Disabled]
Allows you to disable or enable the Energy Using Products (EuP) Ready function.
Setting to [Enabled] allows BIOS to switch off some power at S5 state to get
system ready for the EuP requirement. When set to [Enabled], power for WOL,
WO_USB, audio and onboard LEDs will be switched off at S5 state.
ASUS Hummingbird
BIOS SETUP UTILITY
Server
Power
[Auto]
[Enabled]
[Enabled]
[Disabled]
Boot
Tools
Exit
Select the ACPI state
used for System
Suspend.
←→
↑↓
+-
F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
4-23