Cleaning Drive; Head Cleaner - Fujitsu MCE3064AP Product Manual

5.2

Cleaning Drive

When a dust or smoke of cigarette is stained to the lens actuator, a performance of whole drive
may be down. Clean the lens actuator periodically using following head cleaner.
Note:
Cleaning period differs depending on the installation condition. Usually, cleaning period is
once a three months.
(1) Cleaning method
Clean the head actuator with following method.
1. Turn on the power of the drive.
2. Insert the head cleaner.
3. When the head cleaner is automatically loaded, the optical head positioner moves back and
forth and the cleaning brush mounted on the head cleaner cleans the object lens.
4. When the cleaning is finished, the head cleaner is automatically unloaded. (cleaning time: 15
seconds)
Device Damage
Be sure to use the dedicated head cleaner described above.
Check the cleaning brush state by opening the shutter of the head
cleaner. If the tip of brush is open, use new head cleaner.
5 - 6
Table 5.1

Head cleaner

Part name Order number
Head cleaner CA90002-C980
C156-E142-02EN