Scsi Id Setting; Scsi Id Setting (Single-Ended 16-Bit Scsi Model: Max3Xxxsp) - Fujitsu MAB3045 Product Manual

5.3.1

SCSI ID setting

(1) SCA type 16-bit SCSI model (MAx3xxxSC)
There is no SCSI ID setting terminal for SCA type model. Set the SCSI ID using ID0, ID1,
ID2, and ID3 signals on the SCSI interface connector (CN1).
(2) Single-ended 16-bit SCSI model (MAx3xxxSP)
Table 5.1 shows the SCSI ID setting. Refer to Figures 5.2 and 5.3 for connector positioning
and allocation.
When the SCSI ID is set using the external operator panel
connector CN1, all pins listed in Table 5.1 should be open. If any
of pins are shorted, unexpected SCSI ID is set.
Table 5.1
IMPORTANT

SCSI ID setting (single-ended 16-bit SCSI model: MAx3xxxSP)

SCSI ID
5-6
0 Open
1 Open
2 Open
3 Open
4 Open
5 Open
6 Open
7 Open
8 Short
9 Short
10 Short
11 Short
12 Short
13 Short
14 Short
15 (*1) Short
*1 Set at factory shipment
C141-E035-02EN
MAx3xxxSP (CN7)
3-4 1-2 5-6
Open Open Open
Open Open Short
Open Short Open
Open Short Short
Short Open Open
Short Open Short
Short Short Open
Short Short Short
Open Open Open
Open Open Short
Open Short Open
Open Short Short
Short Open Open
Short Open Short
Short Short Open
Short Short Short
5 - 7