Scsi Function Specifications; Scsi Function Specifications - Fujitsu MAB3045 Product Manual

2.2

SCSI Function Specifications

Table 2.3 shows the SCSI functions provided with the IDD.
See Appendix E for the SCSI interface functions provided for the IDD. Refer to the OEM
Manual –SCSI Physical Specifications–, for details or specifications.
Single-ended type
Differential type
Electrical
Single-ended type
requirements
Differential type
TERMPWR signal send/receive function
Non-shielded type (50 mil pitch): 16-bit SCSI
Connector
Shielded type
Data bus parity
Bus arbitration function
Disconnection/reconnection function
SCSI ID
Addressing
LUN (logical unit number)
Asynchronous mode
Data transfer
Synchronous mode
Data buffer
Data block length (Logical data length=Physical data length)
Table 2.3

SCSI function specifications

Item
Position where the terminating
resistor is mounted on the PCA
Position where the terminating
resistor is mounted on the PCA
8-bit SCSI
16-bit SCSI
8-bit SCSI
16-bit SCSI
8-bit SCSI
16-bit SCSI
C141-E035-03EN
Specification
#0 to #7
(Jumper selection)
#0 to #15
(Jumper selection)
#0 fixed
6 MB/s max.
12 MB/s max.
20 MB/s max.
40 MB/s max.
512-KB programmable segment
buffer (1 to 16)
512 to 528 bytes
(Fixed length)
: Provided : Not provided
2 - 7