Front View - Dell 1125 Mono Laser MFP User Manual

Laser multi-function printer 1125
Table of Contents

Advertisement

Power Cable
Drivers and Utilities CD
Paper Output Tray
a.  The appearance of the power cord and the telephone line cord may differ according to your country's specifications.
b.  The Drivers and Utilities CD contains Dell printer drivers, Scan drivers, Printer Settings Utility, Dell Status Monitor, Dell MFP Center, and an HTML
User's Guide.
NOTE:
It is recommended you use an AWG #26 or lower gauge cord that is a maximum 250 cm in length.
NOTE:
The power cord must be plugged into a grounded power socket.
 
3. Save the carton and packing material in case the printer needs to be repacked.
 
4. Remove the packing tape from the front, back, and sides of the printer.
 
5. Remove the label completely from the scanner module by gently pulling it.
NOTE:
Refer to the setup diagram for installation instructions.
These are the main components of your printer. The following illustrations show the standard Multi-Function Printer 1125.
 

Front View

 
 
 
#
Name:
 
Automatic Document Feeder (ADF) Loads documents for copying, scanning, or sending faxes.
1.
  Document Guide
Telephone Line Cable
Placemat
Paper Tray
 
Description
Ensures that documents are properly fed into the MFP.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1125

Table of Contents