Dell 1125 Mono Laser MFP User Manual page 9

Laser multi-function printer 1125
Table of Contents

Advertisement

 The toner supply is low. You may be able to temporarily extend the toner cartridge life. See
l
not improve the print quality, install a new toner cartridge.
 The paper may not meet paper specifications; for example, the paper is too moist or too rough. See
l
 If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and
l
turn the toner save mode off. See
 A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. See
l
 The surface of the LSU part inside the printer may be dirty. Clean the LSU (see
l
Toner specks
 The paper may not meet specifications; for example, the paper is too moist or too rough. See
l
 The transfer roller may be dirty. Clean the inside of your printer. See
l
 The paper path may need cleaning. See
l
Dropouts
If faded areas, generally rounded, occur randomly on the page:
 A single sheet of paper may be defective. Try reprinting the job.
l
 The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. See
l
Recommended
 The paper lot is bad. The manufacturing process can cause some areas to reject toner. Try a different kind or brand of paper.
l
 The toner cartridge may be defective. See
l
 If these steps do not correct the problems, contact a service representative.
l
Vertical lines
 If black vertical streaks appear on the page, the drum inside the toner cartridge has probably been scratched. Install a new
l
toner cartridge. See
 If white vertical streaks appear on the page, the surface of the LSU part inside the printer may be dirty. Clean the LSU (see
l
Cleaning the
Gray background
If the amount of background shading becomes unacceptable:
 Change to lighter weight pages. See
l
 Check the printer's environment; very dry (low humidity) or high humidity (higher than 80% RH) conditions can increase the
l
amount of background shading.
 Remove the old toner cartridge and install a new one. See
l
Toner smear
 Clean the inside of the printer. See
l
 Check the paper type and quality. See
l
 Remove the toner cartridge and install a new one. See
l
Vertical repetitive
If marks repeatedly appear on the printed side of the page at even intervals:
defects
 The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the
l
cartridge; see
cartridge. See
 Parts of the printer may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself
l
after a few more pages.
 The fusing assembly may be damaged. Contact a service representative.
l
Background scatter
Background scatter results from bits of toner distributed on the printed page.
 The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that
l
the paper does not absorb too much moisture.
 If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping
l
seams on the reverse side. Printing on seams can cause problems.
 If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software
l
application or the printer properties.
Misformed
 If characters are improperly formed and produce hollow images, the paper stock may be too slick. Try a different paper. See
l
characters
Recommended
 If characters are improperly formed and produce a wavy effect, the scanner unit may need service. For service, contact a service
l
representative.
Page skew
 Ensure that the paper is loaded properly.
l
Graphics
Tab.
Maintaining the Drum
Paper.
Vertical repetitive
Replacing the Toner
Cartridge.
Interior).
Recommended
Cleaning the
Recommended
Maintaining the Drum
Cartridge. After the printout, if you still have the same problems, install a new toner
Replacing the Toner
Cartridge.
Paper.
Cleaning the
Cleaning the
Interior.
Cartridge.
defects.
Paper.
Replacing the Toner
Cartridge.
Interior.
Paper.
Replacing the Toner
Cartridge.
Redistributing
Toner. If this does
Recommended
Paper.
Cleaning the
Interior.
Interior).
Recommended
Paper.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1125

Table of Contents