Specifications - FujiFilm 3000 User Manual

Type
Scanning system
Scanning resolution
Input size
Input format
Printing system
Printing modes
Printing resolution
Paper size
Paper types
Output sizes
Paper supply
Paper cutting
Print size and
printing speed
Warm-up time
Noise level
Dimensions/weight
Power supply
Power consumption
Operating environment
Items included in package
Optional accessory
Supplies
34

SPECIFICATIONS

desktop type printer
fixed contact image sensor
400 dpi
letter size, banner (8 1/2" wide)
sheet paper, thickness 50 - 350 microns
thermal printing
normal, photo, reverse, online (optional)
300 dpi
A1(23"), A2(17") wide paper rolls
FUJI FILM Poster Printer paper
Direct Thermal Paper (DTP), Thermal Transfer Paper (TTP), Heavy Duty Poly Paper (HDP)
8"x11", 10"x14", 12"x16", 14"x19", 17"x22", 20"x27", 23"x31"
(33"x44" and 44"x58" are printed in two pieces)
banner (calculated as being roughly equivalent to length of document times specified enlargement)
continuous feed roll paper
bidirectional manual cutter
Enlargement
Output size
(line magnification)
17"x22" approx.1.7
23"x31" approx.2.6
approx. 8 seconds
approx. 53 dB (A)
approx. 28.1 (W) x 12.4(D) x 8.5 (H) inches; approx. 31 lb.
approx. 715 (W) x 315 (D) x 215 (H) mm; approx. 14 kg
AC120V ±10% ; 50/60 Hz
at standby: approx. 15W; printing: approx. 210W
temperature: 50° - 86 °F; relative humidity: 20 - 80% RH
paper bracket unit (1), end caps (2), power cord, User's Guide
interface kit
platen rubber, thermal heads, cutter unit, cutter base
Normal • Reverse modes
TTP • HDP
DTP
1min 00sec 1min 10sec
1min 20sec 1min 35sec
Photo modes
DTP TTP • HDP
1min 50sec 1min 58sec
2min 35sec 2min 48sec