Printing In Reverse Mode - FujiFilm 3000 User Manual

PRINTING IN REVERSE MODE

input
document
Press the paper type key to select the
type of paper being used.
The paper type is shown here.
Place the original into the document
bay face down. Press the start/stop
key to begin printing.
reverse mode
Press the mode key to set the printer
in reverse mode. Select the desired
output size and level of contrast.
'REVERSE' is shown here.
Points to note when using reverse mode
• The printer is designed to monitor the temperature of the
thermal heads and to control printing speed so as to prevent
them from overheating.
(If this happens, a 'SLOW MODE' message will appear on the
message display.)
4
17