How To Specify Print Options - FujiFilm FinePix4800Zoom Owner's Manual

SETTING AND REMOVING PROTECTION FOR ALL FRAMES
PLAYBACK MENU
3
A confirmation screen will appear to proceed,
press the "MENU/OK" button.
G
!
If you do not want to protect any images, press the
"BACK" button to return to the menu. To exit the
84
menu screen, press the "BACK" button again.

HOW TO SPECIFY PRINT OPTIONS

PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
SmartMedia. The recorded specifications include information on which frames are to be
printed and how many prints of each frame are required.
This section gives a detailed description of how to order your prints with the FinePix4800
ZOOM.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
(➡P.119)
When you erase the image, the DPOF setting for that image is deleted at the same
time.
(➡P.119)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
(➡P.119)
No more than 1000 frames can be specified on the same SmartMedia.
4
85