Basic Photography; Taking Pictures (Auto Mode); Photography Mode - FujiFilm FinePix4800Zoom Owner's Manual

SETTING THE DATE AND TIME
G
➀
3
➀
Use the " " button to select the desired
d c
item and then use the " a " and " b " buttons to
correct the setting.
➁
When you have finished setting the date and time,
press the "MENU/OK" button to confirm the setting.
G
!
If you hold down the " a " or " b " button, the numbers
change continuously.
G
!
When the time displayed passes "12:00:00", the
AM/PM setting automatically switches.
G
!
To set the time precisely, press the "MENU/OK"
24
button when the time is at zero seconds.
G
➁
4 4
The "SET–UP" screen reappears. Press the
"MENU/OK" button to exit the settings screen.
If the date was cleared and you selected
"SET DATE/TIME", the camera switches to
photography or playback mode without
returning to the "SET–UP" screen.
2 Basic
TAKING PICTURES ( AUTO MODE )
Photography
G G
➀ ➁
1
➀ ➁
Set the Mode switch to " " Set the
Photography Mode dial to " ". For viewfinder
photography (other than Macro mode), press the
"DISP" button to switch the LCD monitor off.
G Photography range:
Approx. 60 cm (2 ft.) to infinity
G
!
If " ", " "or "
displayed, first wipe the contact surface on the
SmartMedia (gold-colored area) thoroughly with a
soft, dry cloth and then reload the SmartMedia. In
some cases, you may have to format the
SmartMedia (➡P.78).
2
Loop the strap over your wrist, brace your elbows
firmly against your body and hold the camera
with both hands.
G
!
For subjects closer than 60 cm (2 ft.), use Macro
photography (➡P.56).
G
!
To minimize power consumption, you should use the
viewfinder (switch the LCD monitor off) to take pictures.
"is
G
!
Automatic flash mode is recommended for ordinary
photography (➡P.53).
G
!
The image will be blurred if the camera moves when
you take the picture (camera shake). When you are
shooting in low-light conditions, use the flash (➡P.52) or
a tripod to prevent blurred images due to camera shake.
2
25