FujiFilm FinePix4800Zoom Owner's Manual page 60

Warning Displays
Warning Displayed
display
LCD Monitor
panel
The frame number has reached
999–9999.
• The data could not be recorded
due to a SmartMedia error or a
connection error between the
SmartMedia and camera.
• The photographed image cannot
be recorded as it is too large to
fit in the available space on the
SmartMedia.
• The voice captioning file is
faulty.
• Camera faul
There is a strong likelihood of
––
camera shake because the
shutter speed is slow.
A protected frame was erased.
––
The AF (auto focus) cannot work
effectively.
––
118
Explanation Remedy
Switch the Frame No. Memory function off and
use a formatted SmartMedia to take the picture.
• Re-insert the SmartMedia or switch the
camera off and then on again.
• Use a new SmartMedia.
• The voice captioning cannot be played
back.
• Contact your FUJIFILM dealer.
Use flash photography. However, a tripod
should be used for some scenes and modes.
Remove the protection.
• If the image is too dark, take the picture at
a distance of around 2 m (6.6 ft.) from the
subject.
• Use AF lock to take the picture.
Warning Displayed
Explanation
display
LCD Monitor
panel
Outside the AE continuous range. The shot can be taken, but the exposure will
––
There is a print order specified for
image you attempted to erase.
––
The DPOF file contains an error.
–– Alternatively, the DPOF file was
set up on a different device.
Prints were specified for more
than 1000 frames in the DPOF
–– frame settings.
Camera malfunction or fault.
Lens cover fault.
Remedy
not be correct.
When you erase the image, the DPOF
settings for that image are deleted at the
same time.
Press the "MENU/OK" button to create a
new DPOF file and specify all the DPOF
settings again.
The maximum number of frames for which
prints can be specified on the same
SmartMedia is 999. Print specifications can
be set for a maximum of 999 frames on the
same SmartMedia.
• Switch the camera off and on again, taking
care not to touch the lens.
• Turn the camera off and on again a few
times.
Switch the camera off and on again, taking
care not to touch the lens.
119