Table of Contents
Advertisement
Procedure
1
To remove memory module(s) from connectors DIMM3 and DIMM4, go to step 3.
2
To remove memory module(s) from connectors DIMM1 and DIMM2:
Remove the palm rest. See "Removing the Palm Rest" on page 39.
CAUTION:
not use tools to spread the memory module securing clips.
3
Using your fingertips, spread apart the securing clips on each end of the
memory-module connector until the memory module pops up.
4
Remove the memory module from the memory-module connector.
1
memory-module connector
3
memory module
To prevent damage to the memory-module connector, do
1
3
2
2
securing clips (2)
Removing the Memory Module(s)
19
|
Advertisement
Table of Contents
