Table of Contents
Advertisement
Replacing the Display Panel
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display-panel brackets with the screw holes on the
display panel.
2
Replace the screws that secure the display-panel brackets to the display panel.
3
Connect the display cable to the display-panel connector and press down on the
connector latch to secure the cable.
4
Adhere the tape to secure the display cable.
5
Align the screw holes on the display panel with the screw holes on the display
back-cover.
6
Replace the screws that secure the display panel to the display back-cover.
Postrequisites
1
Replace the display hinges. See "Replacing the Display Hinges" on page 67.
2
Replace the display bezel. See "Replacing the Display Bezel" on page 65.
3
Replace the display assembly. See "Replacing the Display Assembly" on page 60.
4
Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.
5
Replace the optical drive. See "Replacing the Optical Drive" on page 24.
6
Replace the hard drive(s). See "Replacing the Hard Drive(s)" on page 28.
7
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
8
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
9
Replace the base cover. See "Replacing the Base Cover" on page 15.
10
Replace any card or blank that you removed from the Media-Card Reader.
11
Follow the instructions in "After Working Inside Your Computer" on page 13.
72
|
Replacing the Display Panel
Before working inside your computer, read the safety
Advertisement
Table of Contents
