Removing The Display Bezel; Prerequisites; Procedure - Dell Alienware 18 Owner's Manual

Owner's manual
Hide thumbs Also See for Alienware 18:
Table of Contents

Advertisement

Removing the Display Bezel

WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1
Remove any installed card or blank from the Media-Card Reader.
2
Remove the base cover. See "Removing the Base Cover" on page 14.
3
Remove the fans cover. See "Removing the Fans Cover" on page 29.
4
Remove the battery pack. See "Removing the Battery Pack" on page 16.
5
Remove the hard drive(s). See "Removing the Hard Drive(s)" on page 25.
6
Remove the optical drive. See "Removing the Optical Drive" on page 22.
7
Follow the instructions from step 1 to step 6 in Removing the Palm Rest.
8
Remove the display assembly. See "Removing the Display Assembly" on page 56.

Procedure

1
Using your fingertips, carefully pry up the inside edge of the display bezel.
2
Remove the display bezel off the display back-cover.
1
display bezel
64
|
Removing the Display Bezel
Before working inside your computer, read the safety
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

18P19e

Table of Contents