Removing the Optical Drive
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery pack. See "Removing the Battery Pack" on page 16.
Procedure
1
Disconnect the optical-drive cable from its connector on the system board.
2
Remove the screws that secure the optical-drive assembly to the computer base.
3
Lift the optical-drive assembly off the computer base.
1
optical-drive cable
3
screws (4)
22
|
Removing the Optical Drive
Before working inside your computer, read the safety
1
2
3
2
optical drive