Attaching The Lens Cap / Strap / Adapter Ring; Attaching The Lens Cap; Loading The Batteries; Compatible Batteries - FujiFilm FinePix S5100 Owner's Manual

1

ATTACHING THE LENS CAP / STRAP / ADAPTER RING

Getting Ready
1
2
3
4
10
Attach the strap to the strap mounts on the camera.
Once you have attached both ends of the strap,
check carefully to make sure that the strap is firmly
secured.
●
!
Attach the strap correctly to avoid dropping the camera.
Pull the lens cap cord through the strap.
●
!
Attach the lens cap cord to prevent losing the lens cap.
Screw the adapter ring in the direction of the arrow
to mount it on the camera.
Mount the adapter ring on the camera at all times.
This setting blocks unwanted external light,
protects the lens and allows the optional
conversion lens to be attached.

Attaching the lens cap

To prevent the lens cap from appearing in the shot
when you take pictures, attach the lens cap to the
strap.
Attach the lens cap to the lens by pressing in on
each side of the cap.

LOADING THE BATTERIES

Compatible batteries

h AA-size alkaline batteries (LR6) (4), or AA-size Ni-MH batteries (HR-AA) (4) (sold separately).
●
!
Please use the same brand and grade AA-size alkaline batteries as those supplied with the camera.
◆ ◆
How to use the batteries
h Never use the following types of batteries, as this could cause serious
problems such as battery fluid leakage or overheating:
1. Batteries with split or peeling outer casings
2. Combinations of different types of batteries or new and used batteries
together
h Do not use manganese or Ni-Cd batteries.
h Soil, such as fingermarks on the poles of the batteries can shorten time for which the batteries
can be used.
h The time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries)
can be used varies depending on the brand. Some alkaline batteries may stop providing power
more quickly than those supplied with the camera. Note also that due to their nature, the time for
which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to +50°F).
The use of AA-size Ni-MH batteries is better for this reason.
h Use Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.
h See P.107-108 for other notes on using batteries.
h When first purchased or if left unused for a long period, the amount of time which AA-size
Ni-MH batteries can be used may be short. See P.108 for more information.
1
2
0 1 2 0 3 0
Outer casing
Check that the camera is turned off (indicator lamp
is off) before opening the battery cover.
●
!
If opening the battery cover while the camera is still on, the
camera will turn off.
●
!
Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the xD-Picture Card or ruin
the image files on the xD-Picture Card.
1 Load the batteries correctly as indicated by the
polarity icons.
2 Press on the battery cover to push the batteries
down.
3 Slide the battery cover closed.
1
11