Using Finepixviewer - FujiFilm FinePix S5100 Owner's Manual

6.2 CONNECTING TO A PC
USE AT DSC MODE
1
Set a camera
1 0 0 2
Indicator
3 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 2 3 4
ＡＦ ＩＬＬ ＡＦ ＩＬＬＵＭＩＮＡＴＯＲ ：ＯＮ ＭＩＮＡＴＯＲ ：ＯＮ
ＺＯＯＭ ＰＯＳＩＴＩＯＮ ：ＲＥＳＥＴ ＺＯＯＭ ＰＯＳＩＴＩＯＮ ：ＲＥＳＥＴ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＣＣＤ−ＲＡＷ ：ＯＦＦ ＣＣＤ−ＲＡＷ ：ＯＦＦ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2
Connect a camera to a PC
Camera
USB socket
(mini-B)
DC IN 5V
USB socket
socket
96
1 Insert an xD-Picture Card into the camera. Plug
the AC power adapter connector into the "DC IN
5V" socket on the camera and then plug the
adapter into the power outlet.
2 Turn the Power switch to turn the camera on.
3 Set the "USB MODE" setting in the "SET – UP"
¶
menu to " " (➡P. ). Turn the Power switch
80
to turn the camera off.
●
!
If shutting off power supply during communication, the files
on the xD-Picture Card may cause damage.
1 Turn your PC on.
2 Connect the camera to your PC using the USB
cable (mini-B).
3 Turn the camera on.
●
!
Make sure that the USB cable (mini-B) is connected correctly
PC
and pushed in.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the indicator lamp
blinks alternately green and orange.
h "
" appears on the screen.
g
h Power save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
98
camera from the PC. See P. for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable (mini-B) when the camera
98
is communicating with a PC. See P. for information on the
disconnection procedure.
3
Set a PC
Windows 98 / 98 SE / Me / 2000 Professional / Macintosh
●
!
The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the
on-screen instructions.
h FinePixViewer automatically starts up and the
Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions
provided on screen to save the images at this
point. To proceed without saving the images,
click the [Cancel] button.
✽ Screen for Windows 98 SE
h A removable disk icon appears and you can use
your PC to transfer files to and from the camera.
If the above operations do not occur, you do not have the required software programs or drivers installed
on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.
Windows XP
1 The "Found New Hardware" help message
appears in the bottom-right corner of your screen.
This message will close when the settings are
completed. No action is required.
●
!
This step is not required for subsequent connections.
2 Specify the settings in the "AutoPlay" dialog box.
h When FinePixViewer is included in the list of actions to perform
Select "Viewing images using FinePixViewer" and then select the "Always do the selected
action" checkbox. This checkbox may not be shown in some cases.
Click the [OK] button to launch FinePixViewer.
h When FinePixViewer is not included in the list of actions to perform
Select "Take no action" and then select the "Always do the selected action" checkbox. This
checkbox may not be shown in some cases.
Click the [OK] button and launch FinePixViewer manually.
3 A new removable disk icon appears in the "My Computer" window.
FinePixViewer automatically starts up and the Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions provided on screen to save the images at this
point. To proceed without saving the images, click the [Cancel] button.
◆ ◆
Regarding the icons
The next time you connect the camera, the removable disk drive icon's name changes to the
"FinePix" icon and name.
Proceed to "USING FinePixViewer" on P.99.
Windows Macintosh
6
97