FujiFilm digital cameras accessory Accessories Manual

*1 IX Nikkor lenses cannot be used.
*2 Vibration Reduction (VR) supported with VR lenses.
*3 Spot metering meters selected focus area.
*4 The camera's exposure metering and flash control systems do not work properly when
shifting and/or tilting the lens, or when an aperture other than the maximum aperture is
used.
*5 Electronic range finder cannot be used with shifting or tilting.
*6 Manual exposure mode only.
*7 Compatible with AF-I Nikkor lenses and with all AF-S lens except AF-S DX VR ED
18-200 mm f/3.5-5.6G; AF-S DX ED 12- 24 mm f/4G, 17-55 mm f/2.8G, 18-55 mm
f/3.5-5.6G, 18-70 mm f/3.5-4.5G, and 55-200 mm f/4-5.6G; AF-S VR ED 24-120 mm
f/3.5-5.6G; and AF-S ED 17-35 mm f/2.8D, 24-85 mm f/3.5-4.5G, and 28-70 mm f/2.8D.
*8 With maximum effective aperture of f/5.6 or faster.
*9 If AF 80-200 mm f/2.8S, AF 35-70 mm f/2.8S, new-model AF 28-85 mm f/3.5-4.5S,
or AF 28-85 mm f/3.5-4.5S is zoomed in while focusing at minimum range, image on
matte screen in viewfinder may not be in focus when in-focus indicator is displayed.
Focus manually using image in viewfinder as guide.
*10 With maximum aperture of f/5.6 or faster.
*11 Some lenses cannot be used (see following page).
*12 Range of rotation for Ai 80-200 mm f/2.8S ED tripod mount limited by camera body.
Filters cannot be exchanged while Ai 200-400 mm f/4S ED is mounted on camera.
*13 If maximum aperture is specified using [NON-CPU LENS DATA] under [ MISC.] in
the [SET UP] menu, aperture value will be displayed in viewfinder and control panel.
*14 Can be used only if lens focal length and maximum aperture are specified using
[NON-CPU LENS DATA] under [ MISC.] in the [SET UP] menu. Use spot or center-
weighted metering if desired results are not achieved.
*15 For improved precision, specify lens focal length and maximum aperture using
[NON-CPU LENS DATA] under [ MISC.] in the [SET UP] menu.