Specifications - FujiFilm FinePix S5100 Owner's Manual

Troubleshooting
Troubleshooting Possible causes
Frame erase does not Some frames may be protected.
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Screens are not A language other than English is selected in
displayed in English. the " " setting in the "SET-UP"
menu (➡P.81).
There is no image or i The camera is not connected to the TV
sound on the TV. correctly.
i "TV" is selected as the TV input.
i The video output setting is incorrect.
The TV image is black The video output setting is incorrect.
and white.
i The USB cable (mini-B) is not correctly
When the camera is
connected to a PC, the connected to the PC or camera.
photographed image or i The PC is not turned on.
playback image appears
on the camera's screen.
i Camera malfunction.
Nothing happens when I
use the Mode dial.
i The batteries have run out.
The camera no longer The camera has suffered an unforeseen
works correctly. problem.
®
Can't print with " " is not selected in USB mode in the
PictBridge. "SET-UP" menu.
The camera was
connected to a PC
when the USB mode
®
was set to " ".
114
eIf you think the camera is faulty, check the following once more.
Solutions
Unprotect frames using the camera on
which the protection was first applied.
1Press the "MENU/OK" button to display
the menu.
2Press "d" or "c" to select " F
"a" or "b" to select "SET-UP". Press the
"MENU/OK" button to display the SET-UP
screen on the screen.
3Press "d" or "c" to move to option 4 and
then press "a " or "b " to select
" ".
4Press "d" or "c" several times to select
"ENGLISH".
5Press the "MENU/OK" button.
i Connect the camera and TV correctly.
i Set the TV input to "VIDEO".
i Change the setting to "NTSC" or "PAL"
(➡P.81).
Change the setting to "NTSC" or "PAL"
(➡P.81)
i Set up the camera and the USB cable
(mini-B) correctly.
i Turn the PC on.
i Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
i Load new or fully charged batteries.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.
®
Select " " in USB mode in the "SET-UP"
menu.
Perform steps 1 to 3 to remove the
camera from the PC.
h Windows
1 The "New Hardware Found" wizard (or
"Scanner and Camera" wizard) appears.
If the wizard does not appear, proceed to
step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the
Macintosh.

Specifications

System
Model
Effective pixels
CCD
Number of recorded pixels
" and press
Storage media
File format
Lens
Aperture
Focal length
Digital zoom
Focal range
Shutter speed
Focus
Sensitivity
Photometry
Exposure control
Exposure compensation
White balance
Viewfinder
LCD monitor
Flash type
Self-timer
Continuous shooting
Shooting functions
Playback functions
Other functions
A/V output
Digital camera FinePix S5100/FinePix S5500
4.0 million pixels
1/2.7 inch square pixel CCD
Number of total pixels: 4.23 million pixels
Still image: 2272 × 1704 pixels/1600 × 1200 pixels/1280 × 960 pixels/
640 × 480 pixels (
4 2 1 `
/ / / )
Movie: 640 × 480 pixels (30 frames per second with monaural sound)
320 × 240 pixels (30 frames per second with monaural sound)
xD-Picture Card (16/32/64/128/256/512 MB)
Still image: Compressed: JPEG (Exif ver. 2.2)
Uncompressed: CCD-RAW (RAF)
✽ Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Fujinon 10× optical zoom lens, F2.8-F3.1
F2.8-F8 10 steps at wide-angle/F3.1-F9 10 steps at telephoto in 1/3 EV increments
Manual/Auto selectable
f=5.7 mm to 57 mm
(Equivalent to 37 mm to 370 mm on a 35 mm camera)
2 : approx. 1.4× / 1 : approx. 1.8× / ` : approx. 3.6×
(10× optical zoom lens is used together: Max. zoom scale: 35.5×)
Normal: Wide-angle: Approx. 90 cm (3.0 ft.) to infinity
Telephoto: Approx. 2.0 m (6.6 ft.) to infinity
Macro: Wide-angle: Approx. 10 cm to 2.0 m (3.9 in. to 6.6 ft.)
Telephoto: Approx. 90 cm to 2.0 m (3.0 ft. to 6.6 ft.)
B m , . N / M
/ / / / : 1/4 sec. to 1/2000 sec. / : 3 sec. to 1/1000 sec.
< : 1/4 sec. to 1/1000 sec. > : 15 sec. to 1/2000 sec.
TTL contrast-type, Auto focus, Manual focus
B
: AUTO (Equivalent to ISO 64 to 320, depending on coditions) 64/100/200/400
m / , / . / / / N / M / < / > : Equivalent to ISO 64/100/200/400
(During setting CCD-RAW: ISO 64/100/200)
TTL 64-zones metering Multi, Spot, Average
B N m , . /
Program AE ( , , , , , ), Shutter-priority AE, Aperture-priority AE,
Manual exposure
–2.0 EV to +2.0 EV in 1/3 EV step increments
(in Programmed auto, shutter-priority auto, Aperture-priority auto)
B m , . /
Auto ( , , , , )
N M < >
Manual modes, 8 positions can be selected ( , , ,
0.33 inches, 115,000 pixels electronic viewfinder, Approx. 100% coverage
1.5 inches, low-temperature polysilicon TFT 115,000 pixels,
Approx. 100% coverage
Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 30 cm to 5.0 m (1.0 ft. to 16.4 ft.)
(Approx. 30 cm to 2.0 m (1.0 ft. to 6.6 ft.): Macro)
Telephoto: Approx. 80 cm to 4.5 m (2.6 ft. to 14.8 ft.)
Flash modes: Auto, Red-eye reduction, Forced flash, Suppressed flash, Slow
synchro, Red-eye reduction + Slow synchro
Approx. 2 sec./10 sec.
Top 3-frame: Number of recorded frames: up to 3 frames
(at intervals as short as approx. 0.3 sec.)
Final 3-frame: Number of recorded frames:
last 3 frames before releasing the shutter button
(at intervals as short as approx. 0.3 sec.)
Long-period continuous shooting
Number of recorded frames: up to 40 frames
(at intervals as short as approx. 0.6 sec.)
Best framing, Frame No. memory
Trimming, Automatic playback, Multi-frame playback, Voice memo
PictBridge, Language ( , English, Francais, Deutsch, Español, Italiano,
FinePix photo mode ( p -mode), WEB camera, Discharge batteries
NTSC/PAL selectable
)
),
115