Increasing Monitor Brightness - FujiFilm FinePix S5100 Owner's Manual

MANUAL FOCUS
PHOTOGRAPHY FUNCTIONS
To set the focus manually, use this function after adjusting the focus automatically with "S-AF" auto
focus mode.
1
2
3
1 0 0 2 0 3
Ｎ １６ Ｎ １６
ＩＳＯ ＩＳＯ 1 1００ ００
ＭＦ ＭＦ
Ｓ-ＡＦ ＡＦ
ＭＦ ＭＦ
＋ ＦＯ ＦＯＣＵＳ ＵＳＩＮＧ ＩＮＧ
Ｃ-ＡＦ ＡＦ ５００ ５００ Ｆ５．６ Ｆ５．６
4
0 1 0 2
48
Available Photography mode:
q
Set the Power switch to " ".
●
!
Manual focus cannot be used in the " r " Movie mode.
B m , .
Set the Mode dial to " ", " ", " ", " ", "
N M < >
" ", " ", " " or " " mode.
1 Unlock the Focus mode selector lock switch.
2 Press the Focus mode selector button to set the
Focus mode to "S-AF", focus on the subject and
press the shutter button halfway. The camera is
then focused on the subject.
3 Press the Focus mode selector button to set the
Focus mode to "MF". The focusing position is
locked on the subject.
●
!
If the subject moves or the zoom setting is changed, repeat
the procedure from step 2.
1 Hold down the " D
" button.
2 Press the "T" or "W" button to adjust the focus.
Use the screen to check the focus.
D+T
Moves the focus further.
D+W Moves the focus closer.
◆ ◆
Mastering manual focusing
The image is unfocused when the camera moves.
Use a tripod to avoid camera shake.
PHOTOGRAPHY FUNCTIONS

INCREASING MONITOR BRIGHTNESS

This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1
2
/
",
3
ＵＰ ＵＰ
Available Photography mode:
q
Set the Power switch to "
B
Set the Mode dial to "
N M < >
" ", " ", " " or " " mode.
fi
Press the " " Low light viewfinder button.
fi
" " appears on the screen and the subject is
displayed brightly.
To cancel increased brightness:
Press the " fi " Low light viewfinder button again.
This function is automatically cancelled after each
Ｎ １６ Ｎ １６
shot.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the photographed
image.
●
!
Even if you increase the brightness in dark locations, you
may not see the subject.
●
!
To maintain the monitor brightness, specify the desired
fi
setting in the " EVF/LCD" (LCD monitor brightness)
adjustment in the settings menu. The adjustment is retained
even after taking pictures or turning camera off. See P.79 for
details.
".
m , . /
", " ", " ", " ", " ",
3
49