FujiFilm FinePix S5100 Owner's Manual page 47

5.3 INSTALLATION ON A Mac OS X
Turn your Macintosh on and start up Mac OS X. Do not launch any other applications.
1
When the bundled CD-ROM is loaded into the CD-
2
ROM drive, the "FinePix" icon appears. Double-click
the "FinePix" icon to open the "FinePix" volume
window.
Double-click on "Installer for MacOS X".
3
The Installer setup dialog appears. Click the
4
[Installing FinePixViewer] button.
●
!
For more information on what is installed, click the [Read Me
First] button and [Using FinePixViewer] button.
The "Authenticate" dialog appears.
5
Enter the name and password for the administrator account and then click the [OK] button.
✽ The administrator account is the user account used for Mac OS X installation and you can confirm the user account
in the Accounts dialog in the System Preferences.
The "License" dialog appears. Read the agreement carefully and then, if you agree to the terms
6
of the Agreement, click the [Accept] button.
The "Read me" dialog appears. Click the [Continue] button.
7
92
The "FinePixInstallOSX" window appears.
8
Click the [Install] button to install FinePixViewer and RAW FILE CONVERTER LE.
The ImageMixer VCD2 installer automatically starts up and a window showing the installation
9
progress appears. (Installation may take several minutes.)
The "FinePixViewer installation completed" message dialog appears. Then click exit button and
10
close it.
Launch "Image Capture" from the "Applications" folder.
11
Change the Image Capture settings.
12
Select "Preferenes..." from the "Image Capture"
menu.
✽
Select "Other..." from "When a camera is connected, open".
13
Select "FPVBridge" from "FinePixViewer" folder in
14
the "Applications" folder and click the [Open] button.
Select "Quit Image Capture" menu in the "Image Capture" menu.
15
5
93