Direct Playback; Pure Direct Playback - Marantz SR7008 Owner's Manual

Contents

Direct playback

Sound recorded in source is played as is.
1
Press PURE to select "DIRECT".
Direct playback begins.
%
• While DSD signals are played back, "DSD DIRECT" is displayed.
• This can be set by pressing PURE DIRECT on the main unit.
Front panel Display
Connections Playback
Rear panel
Settings

Pure Direct playback

This mode is for playback with higher sound quality than in "DIRECT"
mode, by turning off the front panel display panel, which can eliminate
faint low level noise from creeping into sensitive analog circuitry.
1
Press PURE to select "PURE DIRECT".
The display goes dark, and Pure Direct playback begins.
The PURE DIRECT indicator lights.
%
• In DIRECT and PURE DIRECT sound modes, the following items cannot be
adjusted.
• Tone (vpage 165)
• M-DAX (vpage 165)
• MultEQ® XT32 (vpage 167)
• Dynamic EQ (vpage 168)
• Dynamic Volume (vpage 169)
• Audyssey LFC™ (vpage 169)
• This can be set by pressing PURE DIRECT on the main unit.
NOTE
• Video signals are only output when HDMI signals are played in the PURE DIRECT
mode.
• When the PURE DIRECT mode has been selected, the display turns off after about
5 seconds.
120
Remote
Tips Appendix
Index