Connecting A Turntable - Marantz SR7008 Owner's Manual

Contents

Connecting a turntable

This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving
coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
If you set this unit's input source to "PHONO" and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
Turntable
(MM cartridge)
AUDIO
GND
OUT
L R
NETWORK DIGITAL AUDIO IN (ASSIGNABLE)
1 CBL/SAT 2 DVD 1 TV AUDIO 2 CD
COAXIAL OPTICAL
REMOTE
CONTROL
IN
1 2 IN
DC12V 150mA MAX. STRAIGHT CABLE SIGNAL
OUT
GND
DC OUT RS-232C FLASHER M-XPort
AUDIO IN (ASSIGNABLE) AUDIO IN 7.1CH IN
MEDIA
1 CBL/SAT 2 DVD 3 Blu-ray 4 5 CD PHONO FRONT CENTER
PLAYER
AM
SUBWOOFER
FM
(75Ω)
ANTENNA
Front panel Display
Connections Playback
HDMI IN (ASSIGNABLE)
1 CBL/SAT 2 DVD 3 Blu-ray 4 GAME 5 MEDIA PLAYER 6 AUX2
COMPONENT VIDEO IN (ASSIGNABLE)
VIDEO IN (ASSIGNABLE) VIDEO OUT
CBL/ MEDIA MEDIA 1 CBL/SAT 3 Blu-ray
1 3
SAT PLAYER PLAYER
P / P / P / P /
Y B R Y B R
C B C R C B C R
MONITOR/ZONE2
2 DVD MONITOR ZONE2 2 DVD
COMPONENT VIDEO OUT
AUDIO OUT PRE OUT
SURROUND MEDIA SURROUND FRONT
SURROUND ZONE2 ZONE3 FRONT CENTER SURROUND
BACK PLAYER BACK HEIGHT
SUBWOOFER1 SUBWOOFER2
ASSIGNABLE
SPEAKERS IMPEDANCE : 6～8Ω
Rear panel
Settings
HDMI OUT
ZONE2 MONITOR1 MONITOR2
ARC
AC IN
FRONT
WIDE
ASSIGNABLE
NOTE
• The ground line (SIGNAL GND) on this unit is not a safety ground. Note
that depending on the turntable, connecting the ground line may have
ASSIGNABLE
CLASS 2 WIRING
the reverse effect of increasing noise. In this case, it is not necessary
to connect the ground line.
47
Remote
Tips Appendix
Index