Marantz SR7008 Owner's Manual page 168

Av surround receiver
Hide thumbs Also See for SR7008:
Table of Contents

Advertisement

Contents
2 Dynamic EQ
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics. Works with MultEQ® XT32.
On (Default) : Use Dynamic EQ.
Off : Do not use Dynamic EQ.
%
• When the menu "Dynamic EQ" setting is "On", it is not possible to do "Tone
Control" (vpage 165) adjustment.
• This can be set by pressing DYNAMIC EQ on the main unit.
Front panel
Display
Connections
Playback
Rear panel
Settings
2 Reference Level Offset
Audyssey Dynamic EQ® is referenced to the standard film mix level. It
makes adjustments to maintain the reference response and surround
envelopment when the volume is turned down from 0 dB. However,
film reference level is not always used in music or other non-film
content. Dynamic EQ Reference Level Offset provides three offsets
from the film level reference (5 dB, 10 dB, and 15 dB) that can be
selected when the mix level of the content is not within the standard.
Recommended setting levels for content are shown below.
0dB (Film Ref) (Default) : Optimized for content such as movies.
5dB : Select this setting for content that has a very wide dynamic
range, such as classical music.
10dB : Select this setting for jazz or other music that has a wider
dynamic range. This setting should also be selected for TV
content as that is usually mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material
that is mixed at very high listening levels and has a compressed
dynamic range.
%
• Setting is enabled when "Dynamic EQ" (vpage 168) is "On".
168
Remote
Tips
Appendix
Index

Advertisement

Table of Contents
loading

Table of Contents