Kyocera FS C5030N - Color LED Printer Driver Manual page 7

Overview Extended Settings
Extended Settings
The Finisher options are divided in Extended
Settings, Punch Unit Type, and Staple Unit.
In this section the administrator can decide which
options of the Finisher should be available for the
user by the print driver.
You can add the Punch Unit and/or Staple Unit if
the unit is available.
Also you can decide not to select a Unit, even if
the Unit is available, to avoid the user to use the
features available by the specific Unit.
Job Separator or Internal Finisher
You can add a Job Separator or an Internal
Finisher.
The Internal Finisher also supports stapling. You
can decide if the user can use the Staple Unit or
not.
1000 Sheet Finisher
You can add a 1000 Sheet Finisher and in
addition a Job Separator, if your model supports
this combination.
This Finisher supports stapling. You can decide if
the user can use the Staple Unit or not.
3000 / 4000 Sheet Finisher
You can add a 3000 / 4000 Sheet Finisher and in
addition a Job Separator, if your model supports
this combination.
Also you can add a Mailbox Unit, a Booklet /
Folding Unit, a Punch Unit and a Staple Unit, if
they are available and the user should be able to
use them. If you add a Punch Unit you must
select how much holes the Punch Unit supports; 2
holes, 2/3 holes (America), or 2/4 holes (Europe).
Page 7 - 11