Kyocera FS C5030N - Color LED Printer Driver Manual page 6

KyoControl
Classic
The Kyocera
information will be send within the print-job like user name, job name, etc. There are some
points you must take care.
User Name
The user name will be taken from the login name of Windows. To get the valid name you
must open 'Printing Preferences...' (Druckeinstellungen...) and exit with 'OK' once.
Otherwise the user name will not be send.
There is a script available to do this at login-time. Please ask your dealer for the 'Kyocera
MultiDriver' login script.
Job Retention (Auftragsbearbeitung)
You should not use KyoControl and Job Retention together because the print jobs will be
stored centrally on the KyoControl server and should not be stored locally in the printer.
If you have problems using copy collate try following settings:
Tab: Properties
Extended Settings -> RAM disk Mode 1 or 2
Device Settings -> Collate:
Device Settings -> Job Retention:
Limitations
User Name and Job Name are limited to 30 characters.
Attention
There is an issue in Server / Client environment; if you install and configure the driver on a
print-server for sharing, maybe the login-name of the server-administrator will be pushed to
the clients.
To avoid this you must activate 'JobRetention'-tab and delete the user name from the edit-
box. Do not change anything afterwards; click OK immediately after deleting the user name.
This problem only occurs if you changed any 'Printing Properties' on server side.
Attention
If you use this driver in a multi manufactory printer environment please be aware that some
features of this driver uses Kyocera specific commands which will be printed out by our
competitors.
These are the selection of some envelopes sizes like C4, Executive, etc.
And also the selection of some exotic paper sizes like Oficio, 8K, 16K, etc., and custom
paper size.
And the feature of the finishers 'Jog'.
Universal Driver (PCL) is designed to use with KyoControl. Several
Printer
Lock
Page 6 - 11