Job Storage
B/W or Colour Printer
(Colour models only)
Watermark (not PCL XL/6)
RAM Disk / Hard Disk
RAM Disk Mode 1 models support (e.g.):
FS-1800 / 1900, FS-3800,
FS-C5016 / C5020 / C5025 / C5030
KM-3035 / 4035 / 5035
RAM Disk Mode 2 models support (e.g.):
FS-2020D / 3920DN
FS-C5100DN / C5200DN
HD models support (e.g.):
FS-4020DN / FS-C5300DN
VMB models support (e.g.):
FS-1800 / 1900 / 3800, FS-C5016 / C5020 / C5025 /
C5030
KM-2540 / 3040, KM-3035 / 4035 / 5035, KM-6030 / 8030
KM-C2520 / C3225 / C3232, KM-C2525E / C3225E /
C3232E / C4035E
UserBox models supported (e.g.):
KM-3050 / 4050 / 5050 / KM-2560 / 3060
TASKalfa 250ci / 300ci / 400ci / 500ci
TASKalfa 4500i / 5500i / 6500i / 8000i and newer
In this section you can select B/W or Colour printing to
allow the user to print documents in colour or not.
If you select Colour Printer you have three choices:
No Colour Mode selected
old colour models.
Colour Mode 1
This setting is valid for following
printer series:
FS-C50xx and KM-C2520 / C3225 /
C3232
Colour Mode 2
This setting is valid for following
printer series:
FS-C5x00, KM-C2525E / C3225E /
C3232E / C4035E, TASKalfa 250ci / 300ci / 400ci / 500ci,
TASKalfa 4550ci / 5550ci / 7550ci and newer
In this section you can select whether the user can use
the Watermark feature or not. This feature is printer
model independent.
Page 8 - 11
This setting is good for
Need help?
Do you have a question about the FS C5030N - Color LED Printer and is the answer not in the manual?