Using The Utility - TRENDnet TPL-4052E User Manual

TPL-4052E User's Guide
15. Wait for the Powerline Utility installation to complete. At the
Installation Complete window, click Close�
© Copyright 2013 TRENDnet. All rights reserved.

Using the Utility

Before using the utility, please ensure the following:
1. Write down the Device Password (DPW) (16-digit characters
A-Z only) and MAC Address (12-digit characters a-f, A-F, 0-9) of
each Powerline Adapter as this will be required to change the
network name for multiple Powerline Adapters. See "Product
information on device label" on page 2.
2. Make sure the computer in which you are installing the utility
is connected to your network and your Powerline Adapters are
also connected to your network.
3. If you have changed your network name using the Sync button
and you are creating a customized network name, it is required
to reset all powerline devices to defaults using the physical
Reset button on your Powerline Adapter first before using the
utility. See "Push Buttons" on page 3.
4. Please ensure that your Powerline Adapters are already
installed and connected and the Ethernet port on each adapter
is connected to a device powered on.
Upon completing the software installation, a desktop shortcut is
automatically created. Double-click the icon to start the utility or
open the utility if it is already running. Closing the utility will exit the
application.
You can also launch the utility from Start Menu.
Start > Programs (or All Programs) > TRENDnet >
TRENDnet Powerline Utility
Powerline Utility
13