Push Buttons ������������������������������������������������������������������������������������� 3 Powerline Utility - Options; Diagnostic Leds - TRENDnet TPL-4052E User Manual

TPL-4052E User's Guide
Push Buttons
Button Action
Initiate Sync/Connection and generate random
private network name on first adapter (PWR
LED will start blinking).
Match the network name on secondary
or additional adapter and connect to first
Sync
Push and hold
adapter. (PWR LED will start blinking)
(see Using
for 2 seconds
the Sync
Note: To establish connectivity, the secondary
Button
or additional Powerline Adapter's Sync button
Section for
instructions)
must also be pushed within 2 minutes (120
sec) of pushing the Sync button of the first
adapter�
Erases the network name
Push/hold for
(All LEDs will turn off and turn back on).
15 seconds
Reset device to factory defaults (All LEDs will
Push/Hold for turn off and turn back on).
Reset
1 second only Note: Will reset to the factory default private
network name "HomePlug AV".
Save Mode: The device will automatically standby to reduce power usage when there
is no network traffic for more than 10~20 minutes. It will automatically resume back
to full speed service when traffic resumes.
© Copyright 2013 TRENDnet. All rights reserved.
Function

Diagnostic LEDs

Indicates the device and connection status
LED Color Sequence
Solid
Green
PWR
(Power) Off
N/A
Solid
Green
Blinking
Solid
PL Amber
Blinking
(Powerline)
Solid
Red
Blinking
Off
N/A
Solid
1-4
Green
Blinking
(Fast
Ethernet
Off
N/A
Connection)
Note: Powerline (PL) LED color indicates the strength and quality of the Powerline
connection through the electrical system. The following factors may affect the
powerline network's connection quality:
Noise – Generated by appliances which use your electrical system (e.g.
•
Microwaves, ovens, hair dryer, irons, dishwashers, etc.). The quality of your
household electrical wiring may also cause additional noise on your electrical
system.
Distance – Long lengths of electrical wiring through your electrical system
•
between connected Powerline Adapters.
Product Overview
Definition
Device powered on
Device powered off
Powerline connected (Best)
Syncing or Powerline data
transmitting/receiving (Best)
Powerline connected (Better)
Powerline data transmitting/receiving
(Better)
Powerline connected (Good)
Powerline data transmitting/receiving
(Good)
Powerline is not synced or
connected
Network connection established
Data transmission is detected
Network standby or no network
connection
3