Add Adapters Using The Sync Button - TRENDnet TPL-4052E User Manual

TPL-4052E User's Guide
Changing the network name and associating two Powerline
Adapters:
Note: Use the Sync button procedure below if you are connecting
TRENDnet Powerline models TPL-401E, TPL-402E, TPL-405E , TPL-406E ,
TPL-407E or TPL-4052E.
1. Verify that all Powerline Adapters are already installed and
connected using the default network name, see "Installing Your
Powerline Adapter" on page 5.
Prepare your adapters:
2. On one of the connected Powerline Adapters, push and hold the
Sync button for 15 seconds and then release it. All LEDs will turn off and
turn back on. This will erase the current network name assigned to the
first Powerline Adapter.
Note: Once you have completed this step, the other Powerline Adapter
will no longer be able to communicate to this Powerline Adapter.
3. On the other Powerline Adapter, push and hold the Sync button for
15 seconds then release it. All LEDs will turn off and turn back on. This
will erase the current network name assigned to the second Powerline
Adapter�
Start association:
4. Within 2 minutes, push and hold the Sync button on the first
Powerline Adapter for 2 seconds and then release it. The Power (PWR)
LED will start blinking. This will generate a random network name on
the first Powerline Adapter.
5. Push and hold the Sync button on the second Powerline Adapter
for 2 seconds and release it. The Power (PWR) LED will start blinking.
This will create a connection between both Powerline Adapters using
© Copyright 2013 TRENDnet. All rights reserved.
Securing Your Powerline Network
the new network name. All LEDs will turn off and turn back on and the
Powerline (PL) LED will turn on the when adapters are connected.
Adding adapters using the Sync button
If you have changed the default network name assigned to your
Powerline Adapters, additional adapters will not automatically connect
to your powerline network after they are plugged into a wall power
outlet. You have to change the network name on additional Powerline
Adapter in order to join your existing powerline network.
8