Powerline Utility - Map View - TRENDnet TPL-4052E User Manual

TPL-4052E User's Guide
Local Device
All Powerline Adapters connected to
the same network as your computer
will be listed here.
The default device name is main chip
number, followed by the MAC address
and firmware version number. You
can mouse over the header and adjust
column width by clicking and dragging
this cursor .
Remote Devices
These are Powerline Adapters in
remote locations connected to a
selected local Powerline Adapter on
the electrical system.
You can mouse over the header and
adjust the column width by clicking
and dragging this cursor to see more
information.
© Copyright 2013 TRENDnet. All rights reserved.

Powerline Utility - Map View

Manage your device Rename
Highlight a device by Change device name
to meaningful names
clicking the row and click
such as "living room"
buttons below
* DPW (Device Password) is shown on device label
** TPL-4052E has a Power Save Mod. The device setting can only be changed when the device is active.
To keep remote Powerline Adapter in an active state, you can power cycle the device or connect it to a
network device, such as a router or a computer.
Enter Password
Enter device DPW here. You can
manage the remote adapter if
only you enter the DPW.
Powerline Utility
Auto Scan
Auto Scan is selected by default. The
utility will scan for remote devices in
specific intervals (default: 2 sec, you
can change it from 2 to 60 secs).
Auto scan can be disabled by
deselecting it. Remote adapters can be
scanned manually by clicking the Scan
button below.
Network Type
The default network type is public.
When the network name is customized
and changed, it becomes private.
Scan
Manually scan remote Powerline
devices which has same network name
Add Device
Add remote Powerline Adapter
14