Table of Contents
Advertisement
TRENDnet User's Guide
The Powerline Utility
The Powerline Utility allows you doing following jobs:
1. Create a customized network name for your powerline network and
apply it to multiple Powerline adapters at the same time.
2. View Powerline adapters connected to your network (using the MAC
address) and the approximate connection quality and speed of each
Powerline adapter.
3. View and upgrade Powerline adapter firmware.
Note: Link speed displayed in the utility of your Powerline adapters to another
through your electrical system is estimated. Actual link speed may vary.
Powerline Utility System Requirements
• Windows® 8, Windows® 7, Windows® Vista, or Windows® XP
• Microsoft® .NET Framework 3.5 installed
© Copyright 2015 TRENDnet. All Rights Reserved.
Software Installation
1. Insert the included CD-ROM into your computer's CD-ROM drive.
2. At the CD Autorun Prompt window, click Run Autorun.exe
Note: If the Autorun prompt does not appear automatically, open the CD contents
and double-click Autorun.exe.
3. At the CD-ROM main menu, click Install Utility.
The installer will check if you have a previous WinPcap utility.
4. Click OK.
Note: The Powerline Utility requires WinPcap as a base application. If this prompt
does not appear, you may already have the WinPcap application installed. Windows
8 require WinPcap 4.1.3. Windows 7 and older will work with previous versions of
TPL-420E/TPL-420E2K
15
Advertisement
Table of Contents
