TRENDnet TPL-4052E User Manual page 26

TPL-4052E User's Guide
3. Within 2 minutes, push and hold the Sync button on Adapter B for
2 seconds and release it. The Power (PWR) LED will start blinking.
This will establish connectivity between Adapter B, Adapter D, and
Adapter E by reconfiguring the network name of Adapter B to match
the network name of Adapter D and Adapter E. All LEDs will turn off
and turn back on and the Powerline (PL) LED will turn on the when
adapters are connected�
© Copyright 2013 TRENDnet. All rights reserved.
Appendix
24