Add Adapters Using The Sync Button - TRENDnet TPL-306E User Manual

TRENDnet User's Guide
To change the default encryption key between two Powerline adapters:
1. Verify that all Powerline adapters are already installed and connected using the
default encryption key, see "Installing your Powerline Adapters" on
2. On one of your connected Powerline adapters, push and hold the Sync button for 10
seconds and release it. All LEDs will turn off and turn back on. This will erase the current
encryption key assigned to the first Powerline adapter.
Note: Once you complete this step, the other Powerline adapter will not be able to
communicate to this Powerline adapter.
3. Push and hold the Sync button on the other Powerline adapter for 10 seconds and
release it. All LEDs will turn off and turn back on. This will erase the current encryption
key assigned to the second Powerline adapter.
4. Within 2 minutes, push and hold the Sync button on the first Powerline adapter for 2
seconds and release it. The Power (PWR) LED will start blinking. This will generate a
random encryption key on the first Powerline adapter.
5. Push and hold the Sync button on the second Powerline adapter for 2 seconds and
release it. The Power (PWR) LED will start blinking. This will create a connection
between both Powerline adapters using the new encryption key. All LEDs will turn off
and turn back on and the Powerline (PL) LED will turn on the when adapters are
connected.
© Copyright 2012 TRENDnet. All Rights Reserved.

Add adapters using the Sync button

If you have changed the default encryption key assigned to your Powerline adapters,
page 5. additional adapters will not automatically connect to your Powerline network after they
are plugged into a wall power outlet. For any additional adapters, you will need to
reconfigure any additional Powerline adapters that you add to use the encryption key of
your existing Powerline network.
TPL-306E / TPL-306E2K
8