Cannot Connect To A Preferred Network; Network Status Icon Is Not Displayed; Current Network Security Codes Are Unavailable - HP ProBook 5320m - Notebook PC User Manual

Cannot connect to a preferred network

Windows can automatically repair a corrupted WLAN connection:
●
If there is a network status icon in the notification area, at the far right of the taskbar, right-click the
icon, and then click Repair from the menu.
Windows resets your network device and attempts to reconnect to one of the preferred networks.
●
If an "x" is superimposed over the network status icon, one or more of your WLAN or LAN drivers
are installed but the computer is not connected.
●
If there is no network status icon in the notification area, follow these steps:
1. Select Start > Control Panel > Network and Internet Connections > Network
Connections.
2. Click on one of the connections.
3. In the left pane, click Repair this connection.
The Network connections window is displayed, and Windows resets your network device and
attempts to reconnect to one of the preferred networks.

Network status icon is not displayed

If the network status icon is not displayed in the notification area after you configure the WLAN, the
software driver is either missing or corrupted. A Windows "Device not Found" error message may also
be displayed. The driver must be reinstalled.
To get the latest version of the WLAN device software for your computer, follow these steps:
1. Open your Web browser and go to http://www.hp.com/support.
2. Select your country or region.
3. Click the option for software and driver downloads, and then type your computer model number in
the search box.
4. Press enter, and then follow the on-screen instructions.
NOTE: If the WLAN device you are using was purchased separately, consult the manufacturer's Web
site for the latest software.

Current network security codes are unavailable

If you are prompted for a network key or an SSID when connecting to a WLAN, the network is protected
by security. You must have the current codes to make a connection on a secure network. The SSID and
network key are alphanumeric codes that you enter into your computer to identify your computer to the
network.
●
For a network connected to your personal wireless router, review the router user guide for
instructions on setting up the same codes on both the router and the WLAN device.
● For a private network, such as a network in an office or at a public Internet chat room, contact the
network administrator to obtain the codes, and then enter the codes when prompted to do so.
Some networks change the SSID or network keys used in their routers or access points on a regular
basis to improve security. You must change the corresponding code in your computer accordingly.
24 Chapter 2 Wireless and local area network