Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup; Dynamically Choosing A Boot Device Using The F9 Prompt - HP ProBook 5320m - Notebook PC User Manual

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:
●
To set a new boot order that the computer uses each time it is turned on, by changing the boot
order in Computer Setup.
●
To dynamically choose the boot device, by pressing
Menu" message is displayed at the bottom of the screen, and then pressing
Device Options menu.
●
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select a device in the list.
4. To move the device up in the boot order, use a pointing device to click the up arrow key next to the
device name, or press the
– or –
To move the device down in the boot order, use a pointing device to click the down arrow key next
to the device name, or press the
5. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.

Dynamically choosing a boot device using the F9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Open the Select Boot Device menu by turning on or restarting the computer, and then pressing
esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
screen.
2. Press f9.
3. Use a pointing device or the arrow keys to select a boot device, and then press enter.
Your changes go into effect immediately.
108 Chapter 12 MultiBoot
to enter BIOS Setup.
+ key.
esc
esc while the "Press the ESC key for Startup Menu"
- key.
while the "Press the ESC key for Startup
f9 to enter the Boot