Switching The Screen Image; Initiating Standby; Initiating Quicklock - HP ProBook 5320m - Notebook PC User Manual

Switching the screen image

Press fn+f4
if a monitor is connected to the computer, pressing
display to monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. The
from the computer.
The following video transmission types, with examples of devices that use them, are supported by the
fn+f4 hotkey:
● LCD (computer display)
●
External VGA (most external monitors)
●
S-Video (televisions, camcorders, DVD players, VCRs, and video capture cards with S-Video-in
jacks)
● HDMI (televisions, camcorders, DVD players, VCRs, and video capture cards with HDMI ports)
●
Composite video (televisions, camcorders, DVD players, VCRs, and video capture cards with
composite-video-in jacks)
NOTE:
docking device.

Initiating Standby

Press fn+f5
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the computer is in Standby, the power light blinks.
CAUTION:
The computer must be on before you can initiate Standby.
NOTE: If a critical battery level occurs while the computer is in Standby, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed in advanced power settings.
To exit Standby, briefly press the power button or press any key on the keyboard.
The function of the
Hibernation instead of Standby.
NOTE: In all Windows operating system windows, references to the sleep button apply to the
hotkey.

Initiating QuickLock

Press fn+f6
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the computer cannot be accessed until a Windows user password or a Windows
administrator password is entered.
30 Chapter 3 Pointing devices and keyboard
to switch the screen image among display devices connected to the system. For example,
fn+f4 hotkey can also alternate images among other devices receiving video information
Composite video devices can be connected to the system only by using an optional
to initiate Standby.
To reduce the risk of information loss, save your work before initiating Standby.
fn+f5 hotkey can be changed. For example, you can set the
to initiate the QuickLock security feature.
fn+f4 alternates the screen image from computer
fn+f5 hotkey to initiate
fn+f5