System Board - HP ENVY m6-1100 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an AMD processor, a graphics subsystem with
discrete memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an AMD processor, a graphics subsystem with
discrete memory, and the Windows 8 Standard operating system
For use only on computer models equipped with an AMD processor, a graphics subsystem with
UMA memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an AMD processor, a graphics subsystem with
UMA memory, and the Windows 8 Standard operating system
For use only on computer models equipped with an Intel processor, a 7670M graphics subsystem
with 2048-MB discrete memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an Intel processor, a 7670M graphics subsystem
with 2048-MB discrete memory, and the Windows 8 Standard operating system
For use only on computer models equipped with an Intel processor, a 7670M graphics subsystem
with 1024-MB discrete memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an Intel processor, a 7670M graphics subsystem
with 1024-MB discrete memory, and the Windows 8 Standard operating system
For use only on computer models equipped with an Intel processor, a graphics subsystem with
UMA memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an Intel processor, a graphics subsystem with
UMA memory, and the Windows 8 Standard operating system
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. WLAN module (see
e. Solid-state drive (see
ENWW
Battery on page 49), and then remove the following components:
Hard drive on page 50)
Optical drive on page
Keyboard on page 58)
WLAN module on page
Solid-state drive on page
54)
63)
66)
Component replacement procedures
Spare part number
702177-601
702177-501
702176-601
702176-501
698399-601
698399-501
698397-601
698397-501
698395-601
698395-501
77