System --Marker [--Enable]; System --Add_Storage --Enclosure <Service Tag - Dell PowerVault Storage Area Network Reference Manual

For more information about enabling or disable marker detection settings on a DR Series system, see
enable] or system --marker
NOTE: To display the current status of the marker detection settings, use the DR Series system CLI command:
system --show --marker.
system --show --marker
Marker Detection : Enabled
system --marker [--disable]
Description
Disables the marker detection status for all supported backup software on a DR Series system. For example, the DR
Series system supports specific versions of data management application (DMA) software like NetBackup version 6.5
and 7.1, Backup Exec 2010 and 2012, and Veeam 5.7 and 6.0. For a complete list of the supported DMAs, see the
Series System Interoperability Guide .
Syntax
system --marker --disable
Result
Successfully disabled system marker.

system --marker [--enable]

Description
Enables the marker detection status for all supported backup software on a DR Series system. For example, the DR
Series system supports specific versions of data management application (DMA) software like NetBackup version 6.5
and 7.1, Backup Exec 2010 and 2012, and Veeam 5.7 and 6.0. For a complete list of the supported DMAs, see the
Series System Interoperability Guide .
Syntax
system --marker --enable
Result
Successfully enabled system marker.
system --add_storage --enclosure <service tag>
Description
Adds a data storage expansion shelf (enclosure) to a DR Series system. Each expansion shelf that is added to a DR
Series system requires a service tag for the enclosure, a license for each expansion shelf is required, and the DR Series
system only allows two licenses per system (up to a total capacity of 27 Terabytes, which depends upon the size of the
base system).
NOTE: The 300 Gigabyte (GB) drive capacity (2.7 TB) version of the DR Series system does not support the addition
of expansion shelf enclosures.
For more information about the expansion shelf enclosure and its required licenses, see
System Capacities, system --show [--license] [--verbose]
78
[--disable].
and system --license [--validate]
system --marker [--
Dell DR
Dell DR
DR Series System Drive and
[--add].