Stats --Datacheck - Dell PowerVault Storage Area Network Reference Manual

eth3 Tx Drops
eth3 Tx Fifo Errors
eth3 Tx Collision
eth3 Tx Carrier Error
bond0 Rx Bytes
bond0 Rx Packets
bond0 Rx Errors
bond0 Rx Drops
bond0 Rx Fifo Errors
bond0 Rx Frame Errors
bond0 Tx Bytes
bond0 Tx Packets
bond0 Tx Errors
bond0 Tx Drops
bond0 Tx Fifo Errors
bond0 Tx Collision
bond0 Tx Carrier Error

stats --datacheck

Description
Displays the current set of datacheck statistics on a DR Series system.
NOTE: The Progress field in the statistics can indicate one of three values: Waiting, Running, and Idle.
• Waiting: Data Check is in this state because another operation is now running.
• Running: Data Check is in this state when running the scans.
• Idle: Data Check is in this state waiting for the next opportunity to run the Data Check scans.
The following example shows the status of active DR Series system operations in response to the stats --datacheck
command on a DR Series system when Data Check is enabled.
Syntax
stats --datacheck
Result
Data Check
namespace,blockmap,throttle:75%
Progress
Active Writes
Active System Operations
Total Detected Errors
Last Complete Namespace Scan
Last Complete Blockmap Scan
Namespace Scans Completed
Namespace Scan Entries
Namespace Scan Errors
Namespace Scan Start Time
Namespace Scan Progress
Blockmap Scans Completed
Blockmap Scan Entries
Blockmap Scan Errors
Blockmap Scan Start Time
Blockmap Scan Progress
: 0
: 0
: 0
: 0
: 105604787051
: 135791120
: 0
: 0
: 0
: 0
: 108732530699
: 1646686197
: 0
: 0
: 0
: 0
: 0
: No
: 0
: 2012-02-02 17:48:18
: 2012-02-02 16:33:08
: 183
: 6
: 0
: 2012-02-02 17:43:08
: 100.00%
: 8
: 3
: 0
: 2012-02-02 16:33:06
: 100.00%
: Enabled -
: Idle
: No
55