System --Telnet [--Enable] [--Disable]; System --Datacheck [--Enable <All | Namespace | Blockmap>] - Dell PowerVault Storage Area Network Reference Manual

Syntax
system --setlogin
Result
Please enter administrator password:
Please enter administrator's new password:
Please re-enter administrator's new password:
Changed administrator's password.

system --telnet [--enable] [--disable]

Description
Displays the current telnet access status, or you can use the command options to enable or disable telnet access for a
DR Series system.
Syntax
system --telnet
Result
Telnet State : Disabled
NOTE: In this example, the system --telnet command output showed the telnet access status as disabled. The
following example shows the command for enabling telnet access on your DR Series system. To disable telnet
access, use the system --telnet --disable command.
system --telnet --enable
Successfully enabled telnet.
system --datacheck [--enable <all | namespace | blockmap>]
Enables one or both Data Check scan options that can be used on a DR Series system. You can individually enable
namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace
and blockmap scan types will be enabled).
Description
Enables an individual Data Check scan option type (or both scan types) when used in a DR Series system CLI command.
Syntax
system --datacheck --enable all
Result
Data Check configuration successful: namespace and blockmap scans currently
enabled.
NOTE: This example shows all Data Check scan options enabled. To enable only the namespace or only the
blockmap scan, simply replace the all option with either of the other option types you desire in the DR Series
system CLI command.
76