Stats --Datacheck; Stats --Datacheck Command Usage - Dell PowerVault Storage Area Network Reference Manual

Result
Usage:
system --datacheck
[--enable <all|namespace|blockmap>]
[--disable <all|namespace|blockmap>]
[--throttle <1-100>]
--enable
--disable
--throttle

Stats --Datacheck

This set of DR Series system CLI commands allow you to display the current Data Check statistics gathered by the
system, reset the Data Check statistics for the system, and display the statistic-based Data Check help-related options.
For more information, see Stats --Datacheck Command

Stats --Datacheck Command Usage

This topic introduces the stats --datacheck command usage:
• stats --datacheck
• stats --reset --datacheck
• stats --help datacheck
NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide
the correct value or option.
stats --datacheck
Description
Displays the current set of datacheck statistics on a DR Series system.
NOTE: The Progress field in the statistics can indicate one of three values: Waiting, Running, and Idle.
• Waiting: Data Check is in this state because another operation is now running.
• Running: Data Check is in this state when running the scans.
• Idle: Data Check is in this state waiting for the next opportunity to run the Data Check scans.
The following example shows the status of active DR Series system operations in response to the stats --datacheck
command on a DR Series system when Data Check is enabled.
Syntax
stats --datacheck
Result
Data Check
namespace,blockmap,throttle:75%
Progress
Active Writes
Active System Operations
Total Detected Errors
126
Enables online data verification scans.
Disables online data verification scans.
Sets the online data verification throttle percentage.
Usage.
: No
: Enabled -
: No
: 0
: Idle