Run Boss-N1 Cli Commands On Poweredge Servers Running The Windows Operating System; Run Boss-N1 Cli Commands On Poweredge Servers Running The Linux Operating System; Run Boss-N1 Cli Commands On Poweredge Servers Running The Esxi Operating System - Dell BOSS-N1 User Manual

Table 6. Supported CLI commands (continued)
CLI commands
event
NOTE: SMART reports the health status of the M.2 disks. See the SMART status return after the command is run.
NOTE: There might be inconsistency in the events that are listed in BOSS CLI and other management interfaces that
include Dell Open Manage Storage Services.
Run BOSS-N1 CLI commands on PowerEdge servers
running the Windows operating system
About this task
Follow these procedures to run CLI commands using the Windows operating system:
Steps
1. Download the latest mnvcli BOSS-N1 utility for Windows from www.dell.com/support/home.
2. Extract the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file on the system.
3. Browse the directory where you have extracted the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file and run
the mnvcli.exe file.
The CLI window, within which you can run BOSS-N1 CLI commands, is displayed. Run BOSS-N1 CLI commands from this
window.
Run BOSS-N1 CLI commands on PowerEdge servers
running the Linux operating system
About this task
Follow these procedures to run CLI commands using the Linux operating system:
Steps
1. Download the latest MNVCLI BOSS-N1 utility for Linux from www.dell.com/support/home.
2. Extract the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file on the system.
3. Browse the directory to which you have extracted the content of the BOSS-N1_Windows_CLI_xxxx_Axx.zip file and run
the ./mnvcli files.
The CLI window, within which you can run BOSS-N1 CLI commands appears.
Run BOSS-N1 CLI commands on PowerEdge servers
running the ESXi operating system
About this task
Follow these procedures to run CLI commands using the ESXi operating system:
Steps
1. Install ESXi on a host machine.
2. Use WinSCP or SCP and copy the attached files into the /tmp/ directory.
30 Manage BOSS-N1 using CLI commands
Description
Get event information from
NVMe controller.
Windows usage
mnvcli event -c 0
mnvcli event -c 20
Linux/VMware usage
./mnvcli event -c 0
./mnvcli event -c 20